JXF distribution box
Category:
Keywords: Electrical Equipment
- Description
JXF distribution box
-
- Commodity name: JXF distribution box
It is suitable for circuits with an AC frequency of 50 Hz and a rated operating voltage of 500 V or less. Under special requirements, the protection rating can reach IP55. The enclosure is equipped with knock-out holes on both the top and bottom, and provisions can be made for removable mounting plates to accommodate multi-conductor cable entries. The maximum rated current can be as high as 400 A. This product is particularly suitable for metering and control cabinets used in industrial and mining facilities, hotels, and residential buildings.
Overview
It is suitable for circuits with an AC frequency of 50 Hz and a rated operating voltage of 500 V or less. Under special requirements, the protection rating can reach IP55. The enclosure is equipped with knock-out holes on both the top and bottom, and provisions can be made for removable mounting plates to accommodate multi-conductor cable entries. The maximum rated current can be as high as 400 A. This product is particularly suitable for metering and control cabinets used in industrial and mining facilities, hotels, and residential buildings.
Model Meaning
Normal operating conditions
◆ Temperature: Ambient air temperature shall not exceed +40°C, and the lower limit of ambient air temperature shall not be less than -5°C;
◆ Humidity: At a maximum temperature of +40°C, the relative humidity of the air shall not exceed 50%; at lower temperatures, higher relative humidity levels are permissible—for example, up to 90% at +20°C.
◆ Altitude: The installation site shall not exceed an altitude of 2,000 m; high-altitude versions are available upon request.
◆ Installation category: Category II;
◆ Pollution degree: Level 3;
◆ Rated operating voltage: 230 V / 400 V;
◆ Rated operating voltage: 400 A;
◆ Rated short-circuit breaking capacity: 80 kA;
◆ Enclosure protection rating: IP55;Main Technical Parameters
Model Specifications: Height × Width × Depth Model Specifications: Height × Width × Depth JXF1-2525/14 250×250×140 JXF1-6040/23 600×400×230 JXF1-3025/14 300×350×140 JXF1-6050/14 600×500×140 JXF1-3025/18 300×350×180 JXF1-6050/20 600×500×200 JXF1-3030/14 300×300×140 JXF1-6050/23 600×500×230 JXF1-3030/20 300×300×200 JXF1-7050/16 700×500×160 JXF1-4030/14 400×300×140 JXF1-7050/20 700×500×200 JXF1-4030/20 400×300×200 JXF1-7050/25 700×500×250 JXF1-5040/14 500×400×140 JXF1-8060/20 800×600×200 JXF1-5040/20 500×400×200 JXF1-8060/25 800×600×250 JXF1-5040/23 500×400×230 JXF1-10080/20 1000×800×200 JXF1-6040/14 600×400×140 JXF1-10080/25 1000×800×250 JXF1-6040/20 600×400×200 JXF1-10080/30 1000×800×300
Related Products
XGN-12 Solid insulated ring network cabinet
The XGN-12 solid insulation ring network cabinet switchgear is a new generation of environmentally friendly solid insulation ring network cabinets independently developed by our company.
S13 High overload distribution transformer
High overload capacity distribution transformers avoid the problem of serious short-term overload caused by population flow in rural areas, reduce grid operation costs, improve grid operation safety, and are a major direction for the selection of rural distribution transformers in the future.
SBH15-M Oil-Immersed Amorphous Alloy Distribution Transformer
Transformers can step down grid voltage to the levels required by the power system or load, thereby enabling the transmission and distribution of electrical energy. This transformer can replace conventional silicon-steel-laminated transformers and is widely used in outdoor distribution systems. Extensive deployment of this product in the power grid delivers significant energy-saving benefits and helps reduce atmospheric pollution.
SRM16-12/24 Fully insulated inflatable cabinet
SRM16-12/24 fully insulated and gas-filled switchgear is widely used in 10kV/20kV power distribution systems and is the preferred switch product for substations and distribution systems of various users in urban and rural areas.
KYN61-40.5 Armoured metal enclosed switchgear
The KYN61-40.5 armored metal-enclosed switchgear (hereinafter referred to as the switchgear cabinet) is a switchgear unit designed and improved by our factory based on our previous products.
SCB10 and SCB11 Epoxy-resin Cast Dry-type Transformers
This product has a wide range of applications and is particularly well suited for use in environments with stringent fire safety requirements, such as mines, oil fields, subways, power plants, schools, hospitals, commercial centers, high-rise buildings, and all indoor installation systems.
Get a Free Quote
Fill in your phone number and E-mail information, and we will contact you within one working day to solve your problems as soon as possible.
Henan Jinyu Electric Co., Ltd.
Service Hotline:400-688-0375
Tel:+86-18103909516
Email:hnjydq1999@126.com
Address: South Section of Chuangye Road, Ji County Industrial Cluster, Henan Province, Central Plains Electric City
Scan
